GENERAL WARRANTY:

We warrant to you that any Product purchased from us through our site is of satisfactory quality and reasonably fit for all the purposes for which products of that kind are commonly supplied.
This warranty does not apply to any defect in the product arising from fair wear and tear wilful damage, accident, negligence by you or any third party, if you use the product in a way that we do not recommend, your failure to follow instructions, or any alterations or repair you carry out without our prior written approval.

The following events will void the warranty:

a. Customer removes/replaces any components.
b. Damage caused by the poor power supply, lightning, or voltage surges;
c. Burnt parts on hash boards or chips;
d. Miner/boards/components damage due to water immersion or corrosion due to wet environment.

Mining Machine EU does not take any responsibility for or compensate for any loss as a result of downtime caused by delays in transportation and or damaged / defective items.
The warranty offered is covered by the manufactures for the products and not Mining Machine EU.
The warranty is subject to the warranty terms offered by the manufacturer of each product. All claims will need to be dealt directly with the manufacturer and not Mining Machine EU.

The customer must return the defective equipment at their own expense after opening a support ticket and troubleshooting with Mining Machine EU customer support.
Mining Machine EU will pay for the shipping cost to the customer when shipping a replacement unit within the warranty period.
Mining Machine EU will not pay for any loss of downtime or delay caused by customs. In cases where the warranty is void or after the warranty period, the equipment can be repaired for the cost of parts and labor.

Warranties Offered By Manufacturer:

All Baikal Miners:
Once the purchase is completed, it means the recognition of the following policies.
1. No refund and return after the payment.
2. A 45-day warranty for miners.
The following conditions will make the warranty invalid:
1. Disassembled machine, unauthorized changes, or replacement of components.
2. Damage caused by a lightning strike, voltage surge, faulty power supply, etc.
3. Burnt circuit boards or chips.
4. Damage by water, damp or corrosion.
In the case of the above, we will provide paid maintenance service. The freight fee of maintenance is paid by the buyer, and we are not responsible for the loss of income during the maintenance period.

All Bitmain Miners:
1. A 180-day warranty is provided starting from the shipping date. Overclocking the miner will void the warranty immediately.
2. All sales are final. No refunds will be granted. Defective miners can be repaired for free if they fall under the Bitmain warranty policy. After the warranty period, machines can be repaired at the cost of parts and labor.
3. The following events will void the warranty:
a. Customer removes/replaces any components by himself without receiving permission from Bitmain first;
b. Damage caused by poor power supply, lightning or voltage surges;
c. Burnt parts on hash boards or chips;
d. Miner/boards/components damage due to water immersion or corrosion due to wet environment.
4. For all repairs or RMA, within warranty or not, customer must return the defective parts at his/her own expense.
5. Mining Machine EU will cover return shipping costs when shipping a replacement unit within the warranty period.
6. If you notice there are some loose heatsinks when you receive the miner, please inform us by email to info@miningmachinesuk.com within 3 days from the date the package is received according to UPS/DHL/FEDEX’s website.
7. Mining Machine EU does not take any responsibility for or compensate for any loss as result of downtime caused by delays in transportation as a result of custom formalities or other reasons.

All Canaan Miners:

1. A 180-day warranty is provided starting from the shipping date. Overclocking the miner will void the warranty immediately.
2. All sales are final. No refunds will be granted. Defective miners can be repaired for free if they fall under the Canaan warranty policy. After the warranty period, machines can be repaired at the cost of parts and labor.
3. The following events will void the warranty:
a. Customer removes/replaces any components by himself without receiving permission from Bitmain first.
b. Product/board/components damage caused by physical interference, including but not limited to, moisture, fire, flood, lightning, transportation, and extreme environment;
c. Burnt parts on hash boards or chips;
d. Miner/boards/components damage due to water immersion or corrosion due to wet environment.
4. For all repairs or RMA, within warranty or not, customer must return the defective parts at his/her own expense.
5. Mining Machine EU will cover return shipping costs when shipping a replacement unit within the warranty period.
6. If you notice there are some loose heatsinks when you receive the miner, please inform us by email to info@miningmachinesuk.com within 3 days from the date the package is received according to UPS/DHL/FEDEX’s website.

7. Mining Machine EU does not take any responsibility for or compensate for any loss as result of downtime caused by delays in transportation as a result of custom formalities or other reasons.
All Dayung Miners:
1. A 180-day warranty is provided starting from the shipping date.
2. This warranty does not apply to any defect in the product arising from fair wear and tear, wilful damage, accident, negligence by you or any third party.
3. This warranty will lapse if you have done the following:
• Burned parts on the hash board or the chips
• Water damage
• You yourself have removed and / or replaced elements without consultation
• Poor power supply, lightning or voltage over voltage

Guarantee:
You should return the Product in its original packaging to Dayun Company at the address above. Prior authorization must be obtained for any returns by contacting Dayun Company customer services and obtaining a RMA number, which must be quoted in any correspondence. You must back up all data as we cannot guarantee your data during repairs or testing.
If any item is returned which is found not to be faulty by our technicians, then a charge will be made for return carriage insurance and administration.

All EBANG Miners:
1. Three Guarantees: machine warranty valid for six months
2. In the qualified mine, we offer an additional after-sales service.

After-sale service:
1. When the machine breaks out, please contact Ebang customer service and they will help you troubleshoot the first time.
2. Failed to troubleshoot, please remove defective parts and return to service after the remote confirmation.
3. Returning to repair, please fill in the “after-sales information form” and put into the package, then sending back together with the machine.
4. Returning to repair, please pay attention to protecting the Serial Number, because we can judge the warranty time according to it.
5. Re-delivery for repairing, pay attention to the components package, and take some protective measure to avoid the damage caused by the poor package.
6.Received repair machine, customer service will contact you immediately. After confirming the problem and the part, it will be put into maintenance timely.
7.Maintaining time from the confirmation and signature of the customer service, it will be 1-5 working days.
8. On completion of repairing, customer service will promptly contact customers, inform the maintenance situation and precautions. Then send back to you.

All iBeLink Miners:
1. A 180-day warranty is provided starting from the shipping date.
2. All sales are final.
3. Defective machines will be repaired for free under the Broadeng warranty policy.
4. The following events will void the warranty: overclocking the miner; customer removal and replacement of any components without receiving permission from Broadeng; damage caused by poor power supply, lightning or voltage surges; burnt parts on hash boards or chips; damage due to water immersion or corrosion in a wet environment.
5. The customer will return the defective equipment at their own expense, after opening a support ticket and troubleshooting with iBeLink customer support. Coin Mining Central will pay for the shipping cost to the customer when shipping a replacement unit within the warranty period. Coin Mining Central will not pay for any loss of downtime or delay caused by defective equipment. In cases where the warranty is void or after the warranty period, the equipment can be repaired for the cost of parts and labor.

All Innosilicon Miners:
All miners will be tested by the factory before shipment and certified by Innosilicon. The post-sales service policy is as follows. After payment, your order will be processed immediately.
180 days parts warranty for any miners directly purchased from Innosilicon (counting upon miner arrival).
Please don’t send any machines or parts without contacting our support team first. Any loss or damage as a result of lack of contact will be the responsibility of the customer.
The warranty expires in the following cases:

Miner is demolished, privately altered or component replacement by customers;
Lightning, voltage surges, poor quality power supply causing damage;
Circuit boards and components damaged by water, exposed to moisture or corroded;
The circuit board or the chip is completely burned;
Excessive Over-clocking in an overheating environment.
If above case happens, services of your miner maintenance will be charged. For the specific procedures, please refer to the after-sales process.

All Pangolin Miners:

1. Please contact us to help troubleshoot the issue with online consultation.
2. If you are able to locate the defective part/unit. Please create a warranty order and ship to Pangolin
3. If the PCB/unit of the Miner or PSU is burnt, oxidized, broken or the PIN on it is fallen off, it will be scrapped the unit. Please do not return it.
4. If the customer disassembly/replaces any parts especially hashboards without permission from PangolinMiner, for technical reasons the miner/PSU would not be repaired.
5. Please only ship the defective part (Whatsminer/PSU/hash board/control board) to our repair center, do not include the accessory.

Shipping.
a. Pack the parts carefully better with foam to avoid shipment damage, the warranty will not cover the faulty part caused by shipping.
b. Please print two copies of the Repair Ticket, stick one outside the package, and put one inside. The package will be rejected if there are not two copies of Repair Ticket.
c. Please be noticed all the custom clearance fee would be billed to clients and inform your transport company to deal with the custom issue with you first to avoid the delay. PangolinMiner will not be respond to any custom issue. (Better declare the low value “within 50$” as the “Warranty Item”).
d. Please make sure that the delivery made on work days only, and “MiniServer” (or your “Power supply”) described on the waybill item description.
e. We will not accept any form of “Freight Collect”, and the packages will be sent back to the sender. Per our clause of warranty, you need to take over all the expense of shipment.
f. Please DON’T ship any product of the company that PangolinMiner is not responsible to. Packages containing other products will be returned to the sender or discarded.
g. The warranty will not cover the products have been repaired by other association or people.
h. PangolinMiner will only give support to our Direct Clients, all the product sold from PangolinMiner were recorded in our systems. Any resold parts will not be included to repair support.

All Goldshell Miners:

If the product you have purchased is found to be defective, you need to create a support ticket on the Goldshell website. You may refer to the following web page for additional details: https://www.goldshell.com/ticket_new/

After-Sales Maintenance Service period starting from the date of delivery. You can enjoy free after-sales service within 180 days.
If your product is under warranty, Goldshell will service the product free of charge and will pay for the return postage. The return shipping costs back to the repair facility are not covered.
In order to avoid a long maintenance period, we may send parts for you directly. Please get the disassembly authorization from the after-sales staff. Then replace the parts by yourself.

A voided warranty due to:
Product damage caused by improper installation, use, and maintenance;
Product damage or failure caused by dropping accident, theft, abuse, negligence, improper operation;
Product/board/components damage caused by physical interference, including but not limited to, moisture, fire, flood, lightning, transportation, and extreme environment;
Product damage caused by overvoltage or Undervoltage or leakage;
Product damage caused by significant higher or lower ambient temperature exposure;
Product damage or loss caused by natural disasters, including, but not limited to, floods, lightning, fires, earthquakes, tsunamis and lightning strikes, etc;
Disassembly or alteration of Product by any person other than us or an authorized service provider of us;
Product damage or failure caused by the use of power supply, parts or units which are neither supplied by us nor our authorized providers;
Unauthorized changes on firmware and hardware;
Product damage or failure caused by the use of unauthorized firmware or drivers;
Damage or loss of data due to improper use;
Product without an original barcode or SN label or which has been altered, defaced or removed;
Mixed boards: any or all of the hash boards or control boards in a Product are not the original parts of such Product, or anything preventing us from determining whether the hash boards or control boards are the original parts of such Product;
Any reason other than those caused by us that makes it impossible for us to diagnose whether the Product is under warranty.

Warranties Offered By Manufacturer – USED MINERS:
All used miners will be tested in our facility before shipment.
The warranty offered is covered by the manufactures for the products and not Mining Machines EU. The warranty is subject to the warranty terms offered by the manufacturer of each product. The warranty left on the used units will be dependent on the release of the unit and batch by the manufacture.

The warranty expires in the following cases:
Miner is demolished, privately altered or component replacement by customers;
Lightning, voltage surges, poor quality power supply causing damage;
Circuit boards and components damaged by water, exposed to moisture or corroded;
The circuit board or the chip is completely burned;
Excessive Over-clocking in an overheating environment.
If the above case happens, services of your miner maintenance will be charged. For the specific procedures, please refer to the after-sales process.